Your Custom Text Here
Whether you send in your HD800 headphones and get Colorware treatment for 299$, or opt for a brand new set replete with Colorware's motley fingerprints for 1599$, there is but one reaction to the Senn/Colorware collab: whoa. (Channel Keanu Reeves to do it right.)
The Lego-dynamic duo also do the HDVD 800 headphone amp: post-sale whoa for 249,00$ or pre-sale whoa for 2099$. (Prices in USD.)
Whoa.
This rather flashy-looking USB DAC is ALO Audio's new The Island. It will go toe to toe with Meridian's Explorer and the glut of USB interfaces that have hit the market lately. Unique to The Island is balanced headphone output. And of course the bright colour schemes. And the giant three-stage volume pot on top- something I think headphone lovers will really appreciate.
Otherwise, The Island's rather hi-flight specs, and its 299$ USD price fall in line with what is out there today.
Description:
The power and performance of balanced audio has arrived in The Island. Spacious sound stages are delivered with a superior sonic punch. Chewy bass lines underpin sparkling highs.
Specially machined volume knob paired with 3 gain stages gives you finer control of your listening, regardless of your headphone selection. The 24 Bit / 192 kHz capable Cirrus Logic CS4398 DAC chip offers plug and play convenience with high-fidelity asynchronous fully balanced performance on both PC and Mac. (PC’s require included drivers for 24 Bit /192 kHz playback.)
A simple design and anodized aluminum enclosure makes The Island a solid choice for portable listening with your laptop as well as home desktop listening sessions. Available in Blue, Gold, Silver and Black anodized finishes.
Tech specs:
Input 1 x mini -USB
Output 1 x 3.5mm stereo jack socket
Output 1 x Stereo jack(Balanced)
Input: USB 2.0 Audio
Output: stereo analog, balanced
Sampling Frequency
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz
Resolution
16 up to 24 bit
Output power-Balanced :
130mW @32 Ohms
200mW @50 Ohms
160mW @300 Ohms
83mW @600 Ohms
Output power-Unbalanced :
130mW @32 Ohms
200mW @50 Ohms
660mW @300 Ohms
330mW @600 Ohms
Frequency response:
5-22kHz (+/-1dB)
THD+N:
0.001% @ 1kHz
Power:
5V DC from USB bus .
Amber indicator light illuminates when powered.
Head-fi's dleblanc343 has put up a one-on-one shootout between two flagships, the European AKG K3003 and Shure's new SE846, which I demoed back in May. dleblanc343 found the SE846 better than the K3003 for these reasons:
1. They're a better end product overall. The detachable cables being the biggest motivator for most to be willing to dish out a grand on earbuds. You get usable transport cases, a earphone that is less prone to kinks and cosmetic damages, more vast selection of tip options (not including aftermarket), and much much better isolation from noise. Comfort and hold is also superior.
2. They sound better with most genres of music and are an overall more realistic listening experience.
From a holistic perspective I tend to agree. The SE846 comes with a fit more traditional to both portable audiophiles and stage musicians. Its cables are robust, detachable, and use MMCX connections. Its selection of ear tips is massive, and it provides a more coherent sound experience.
Both earphones represent incredible technological leaps forward and both represent the respective tops of their classes. If sound weren't the deciding factor for most prospective customers, fit could be. The Shure's fit could be summed up thusly: strap in and down; the AKG's like this: push in.
Expect more and more Shure SE846 reviews to trickle in.
From their perch atop headfi's premier sponsor lounge, Woo Audio massage in the new 234 MONO headphone amp with tube switching key (TSK) tech that allows various power tubes to be switched out from the same socket. Perhaps more interesting is the fact that MONO is both a headphone amp and a speaker amp. Perhaps more interesting than that is the MONO's stunning organic design.
More details and rather fine photos at the MONO thread.
Ω was rather impressed by their recent WA7 Fireflies.
Green thinking has kept automobiles out of my garage and garbage disposals out of my sink. It has forced me to master toilet paper origami. So when I say that my anus doesn’t generally pucker up when I hear about a new, hydro-sucking headphone amp, remember that I get by on two squares a day.
The flip side of all of that is simple economics. Headphone amps can cost a pretty penny. But after literally saving thousands of dollars on toilet paper since I was fifteen, and because the only tyres I buy new are for my Marinoni, I’ve begun to look more closely at investing in a mains-sucking amp for those carbon-footprint-be-damned days. Today’s subject, the rather top-flight Beyerdynamic T1/T5 and Otomatsu BDR-HPA02 combo from Jaben Japan, has piqued my interest because:
- It is economical.
- It sounds damn good.
- It comes with a Centrance DACport USB DAC.
- No toilet paper required.
Think I'm shitting you? Read on.
Spec:
Frequency response: 5Hz -80kHz
Distortion: THD+N 0.0046％
Maximum output power: 1500mW x2 @45Ω / high gain
Headphone range: 16Ω - 600Ω High/Low ゲイン
Power: AC100V 50-60Hz
Size: W230mm x D180mm x H80mm
The above spec list was taken shamelessly from Sasaki san’s amazing Music TO GO! blog.
Otomatsu BDR-HPA02 & Beyer T1/T5P: 248.000¥ (2.480,00 $US)
International users: refer to Jaben’s English website for details on how to purchase the combo for your country.
ohmage: haptics
The BDR-HPA02 is a simple machine. The front bristles with the bare minimum of audiophile flare: an aluminium volume pot, a couple of lockable Neutrik outputs, and a plastic power switch. The outputs come in the following flavours: 4-pin XLR, and 6,3mm stereo phono. The low-profile power switch feels great. Sometimes I fiddle that sucker on and off just for the pleasure of it. (My nipples explode with delight!) On the back, an ATX socket sits abaft the mains socket, a gain switch, and a single L/R RCA input sits abaft the volume pot. With the exception of the gain switch, ergonomically speaking, this amp is sound. It isn't, however, pretty.
ohmage: kitsch
There is nothing necessarily pretty about Beyerdynamic nor Aurora Sound. Evidence: heat sink styling, matte finish, camp stove volume pot. If anything, post steam punk minimalism ran amuck. Kitsch totally fled. Even the Beyer upgrade Cryo cable, a weaved tangle of savoir-faire, coils sombrely next to its mates. CMoy amps in gum tins are kitschier than this.
ohmage and porridge: build quality and finish
Locking headphone ports, thick rubber feet, RCA jacks Titanically anchored in an Atlantic of aluminium and steel- these are the marks of a safe. Considering that you can force your way in with a good Allen wrench, the Otomatsu ain’t no vault. But its build quality sets it right in my carping eye.
Beyer headphones are modular tanks. Take them apart, put them back together. A little scratch never looked so good. Destroying them takes a car.
As for amp finish quality...
This Oto - if I may call it that - looks like a garage project. Maybe it is. It is a little rough around the edges. (Indeed, fingering its edges a few times will sharpen your nails.) In comparison to its tasty power switch, the volume pot's mien is pallid. Its undamped, slightly loose action reminds me of a not-yet CLA’d Nikkor 28/2,8 Ai/S lens. It does the job, but it's not the lens you put on when the your camera geek mates come over to fiddle your film.
Onto the T5p and T1 mods:
Jaben’s T1/T5 wiring work is tip top. The mini XLR ports are perfectly capped and anchored into the headphones. The job is done so well, in fact, that I’m buggered as to why they don't licence their work to companies like Beyerdynamic. This can’t be the same Jaben that prints their amps with nonexistent websites, mislabels buttons, and on and on, can it?
Sound
The T1 and T5 have been reviewed ad infinitum. Ergo, this section will focus on the Otomatsu amplifier. Where changes to the stock T1/T5 exist, they will be noted.
Power
Both the T1 and T5 are easy to drive headphones. The BDR-HPA02 spits out enough voltage in low gain to burn the T1s and enough current to fulfil the more stringent requirements of the T5. Its output isn’t quite able to toast low-impedance planar-magnetic headphones but it certainly supplies enough power to get you into your very own Phonaks.
The BDR-HPA02's noise floor is pretty much even with pre-2009 iPods, if not lower. For a desktop amp, that is impressive. You may find that the output of your portable player or amp is even noisier. My Walkmans certainly are. Many portable amps, like ALO Audio's excellent Rx series, also output a noisier background.
For the record, both Woo Audio's WA7 Fireflies and Antelope Audio's Zodiac Silver have lower noise floors.
I can detect the barest hint of background noise via Audio Technica's ES10. That effect is compounded through Sleek Audio's CT7 / SA7. But there isn't a hint of noise with any proper headphone.
At full volume and low gain, the BDR-HPA02 kept clean signals at the following decibel values via:
- Audio Technica ES10: BDR fed from 2V line out: 86-95dB with peaks over 100dB
- Beyerdynamic DT880/600: BDR fed from 2V line out: 79-90db with peaks over 98dB
- Hifiman HE-500: BDR fed from 2V line out: 79-90dB with peaks over 97dB
- Beyerdynamic T1: BDR fed from 2V line out: 87-95 with peaks over 98dB
The BDR-HPA02 kept clean signals at the following volume settings and decibel values via:
- Grado PS500: from 2V line out: 86-93dB with peaks over 96dB @85% volume
- Beyerdynamic T5P: from 2V line out: 82-92dB with peaks of 97dB @80% volume
The above merely illustrates that the BDR-HPA02 has power.
ohmage +1
Balance
The BDR-HA02 is a neutral-sounding amplifier. The stereo image is wide, especially when driving low current headphones like the T1 and DT880/250/600. It also favours no frequency band. It isn’t too wide. It isn’t too cramped. The most apt (and ridiculous) word I can think of to describe this amp’s soundstage ‘endless’.
But even Kraftwerk must quit sometime.
The DT880 and T1 are one thing; a portable headphone like the ES10, or a low Ω home phone like the ES500, is something completely other. When driving low Ω loads, the HPA02‘s stereo image audibly compresses. Mids step forward a little, high and low stereo detail tapers off. But I’m not about to bag that. The mixing, or relaxing of stringent channel separation can be a good thing if only because it is closer to what your ears naturally hear. It also helps that even under stress, the HPA02 doesn’t botch things.
Both the wide stereo separation, which is present under low current loads, and the more compressed stage care of high current loads, sound great.
ohmage +1
Tracking
How about this question: can an amp that was designed to push enough voltage into a pair of 300Ω cans maintain requisite left/right balance normal listening levels?
Yes. With normal to high-impedance headphones, balance is 100% perfect.
How about IEMs?
Even when fed by 2-3V line level outputs, the BDR-HPA02 is able to sustain perfectly balanced signals at modest volume levels. Because noise levels are rather low, you can even enjoy the odd couple. True, your IEMs will force reproduction errors from the HPA02, but that’s never stopped eager audiophiles before.
ohmage +1
Bass vs. Mids
Both the HPA02‘s single ended and balanced outputs spit flat signals. Grip, control, and wide spatial mapping are pillars upon which the HPA02’s output builds itself. Under the yoke of normal loads, bass never intrudes into the mids. Even when lower impedance headphones are plugged in, bass relinquishes control in only the minutest of steps. Oddly, upper bass and lusty mids get the nod under these circumstances.
Yay?
I’ll say. No matter the headphone, the HPA02 plays smooth. It errs on the side of liquid rather than grain. I think it will have its fans.
ohmage +1
Bass vs. Highs
Again, when driving high-impedance loads, both bass and highs step forward on even footing. Stereo width is enormous. Detail in all frequencies is top notch. Only when low Ω headphones and earphones are plugged in does do audible artefacts creep in. But at no time does this amp sound bad.
ohmage +1
Vs. Low-Impedance
Output artefacting is gone by about 30 Ω, but in order to achieve peak performance, headphones with a minimum of 50 Ω input impedance are required.
porridge +1
Vs. High-Impedance
This amp is home with semi-high to high ohm headphones. It has plenty of voltage at low gain for all but the skankiest of wannabe-speaker headphones. It is limited only by current, and that, only when low Ω headphones are connected. Given the right headphones, hallelujah!
ohmage +1
ohmage: Balanced vs. single-ended
Both outputs appear to cover similar voltages. Both supply adequate channel balance. The killer point of this balanced system is that the tame little T5, and the somewhat powermongering T1 change hats a little. The first time I heard the Jaben balanced T5 I just about ate my headgear. Bass, closer to the DT880/32, wider stage. Control is similar. But that bass. Oh that bass.
The T1 doesn’t get any more liquid, it just opens wider. Even my wife liked/loved it. For a time, she wouldn’t let me take it back. I passed by the T1s specifically because its midrange tends to dominate my favourite band, the mid-highs. Well, this T1 (at least with this amp) is a perfect beast.
ohmage +1
Today I powered through three sheets of Bounty and drank half a bottle of vodka. It’s one of those ‘be-damned days. It’s been a glorious couple of months with the BDR-HPA02 / Beyer system. Jaben have a good thing to sell you. You have a good couple of things to think about.
Namely: if you have a system already, is it worth it to upgrade? I can’t say ‘yes’ here unless you are a collector. What about if you are getting into headphones, or are making the big step up to desktop audio? Absolutely. Newbies: don’t waste time and money on cheap, throwaway upgrades that you will upgrade again and again. Go to the limits of what you can reasonably afford and don’t look back. Don’t hamstring your savings, but invest for the long term. This HPA system is great. The inclusion of a DACport means that you can listen to your favourites from iTunes. Concurrent single-ended and balanced output allows you to compare and contrast the two. A package deal lessens shipping costs and obviates sea-saw decisions.
To top it all off, Jaben has stepped up. The craftsmanship they’ve shown in their cables and connection hardware is impeccable- I ain’t shittin’ ya.
ohmage: 10
porridge: 2
The train click-click-clicks through my Gravol-induced coma, trumping the Kitchen Aid mixer on my brain. 18.900¥, 40$ CAD over what I’d pay in Vancouver. Shit. There has to be a break somewhere. “When this place pours, it rains for days!” raps Classified from the burning Fiio X3 in my trousers. I suck in the sweaty Tokyo air, cough, and track ahead- Macklemore’s “Thrift Shop” pops up.
I nod, this time not with the Gravol. Maybe we could slum it with the Oster.
Spec:
THD+N < 0.004%@1KHz
SNR > 108 dB (A-Weight ）
Frequency Response 10Hz~20KHz（+/-0.2)
Dynamic range > 103dB
Crosstalk > 90 dB @10KΩ @1KHz
Line output Level > 1.7 Vrms
Output Power 1> 540 mW@16Ω
Output Impedance <0.3Ω
Output Power2 > 270 mW@32Ω
Crosstalk >75 dB@1KHz
Output Power3 > 30 mW@300Ω
THD+N < 0.005%@1KHz
Frequency Response 10Hz~20KHz（+/-0.2)
MAX output voltage > 8 Vp-p
SNR > 105 dB (AUX IN)
MAX output current > 250 mA
USB 5V/500mA recommend:USB 5V >1.5A
Battery Capacity 3000 mAH
Battery Life >10 Hours
Storage 8 GB
Fiio X3: ~200$-300$
Disclosure: In the end, I went with the Kitchen Aid mixer. I want something to perform well, to last- and to look good in my kitchen. That’s probably a pretty good look my approach to reviewing audio devices.
The X3 has the looks, and it seems to be made well. For most intents and purposes, Fiio offer Kitchen Aid performance at Oster prices.
There are a number of catches, however...
porridge: haptics
What they have done right: buttons in lieu of a douchey touchscreen, metal instead of plastic, standard ins and outs, is done well. Touch screens require good programming and layout knowledge - both items are Ancient Greek to audiophile companies.
But even hardware nubs require art and planning.
The X3‘s controls are combo buttons. They are splayed across a front panel lined with nothing but combo buttons. The options are: play/pause/off/on, up/down/track forward/backward, and quick menu/bookmark/up-one-level. The full count is six buttons- and not one with a singular purpose. I get the idea that Fiio were more interested in designing a layout rather than adhering to good interface guidelines.
The short of it: simple operations like setting the volume and changing tracks require the player to be navigated to corresponding screens. We haven’t even touched the skewed button layout.
I understand why Fiio did it. It looks cool in product photos/renderings. Yay! But form should follow function. Up/down functions work a lot better in a vertical layout. Ditto left/right functions work better in a horizontal layout. The non-standard diagonal control scheme requires memorisation- and cursing.
If you can slant your thinking to fit the X3, you will find that functionally, it works pretty well. EQ settings are accessed quickly. Ditto bookmark functionality. Ditto drag and drop, digital output, etc. and so on. But after months of using the X3 I’m baffled that Fiio didn’t even at least raise relief patterns on the buttons to help categorise their use. Even Apple, who insist on naked, buttonless designs, have added dedicated volume controls to every mainstream iDevice they make.
As for battery life, the X3 fulfils its spec. Consistently I am able to get 8-10 hours of life with mixed use.
NOTE: if you aren’t used to sound control schemes, the X3 will feel right at home. Your biggest WTF moment will be reading this review- as in, “WTF is he on! This thing rocks!” If you are used to ergonomic designs, using the X3 will require a towel to catch WTF spittle.
ohmage: kitsch
Despite playing back the most important file types, and sporting solid outputs, great sound quality, and so on, the X3 is a no-frills device. Its price pales in comparison to comparable HiFiman, Astell&Kern, iBasso products. It is cheaper even than a hi-end iPod. Part of its economic pricing has to do with the meagre allotment of 8GB onboard memory. To many audiophiles, space is limited only by their growing catalogue of micro SD cards. Users coming from players with more space may squish their brows. SD card integration is well-managed by the X3.
Apart from haptic concerns, the X3 is designed well.
Its shape is simple. Its looks are clean. Had Fiio employed a more traditional plus controller and discrete volume control, the X3 would be even sleeker.
ohmage and porridge: build quality and finish
Fiio's no-nonsense approach to audio circuitry applies to every aspect of their design. The X3 is a relatively solid machine. Its brushed metal back is hard to scratch and its two-plate design is simple and strong.
The back case will flex under pressure, and when twisted, deform more than a comparable iPod will. But the overall design is strong enough to survive the rigours of mobile use. Fiio saved money by inking, not laser etching their control fonts.
Ports are well anchored in the body. Both coax and headphone outs wear o-rings that keep the surrounding chassis from scratching. Strangely, the line out lacks does without one. There is no plastic insulator between the o-ring and the body.
The screen is bright enough for outside use, but its colour is poor. Everything is cast in blue. Again, most audiophiles probably won’t take issue with this. An audio player is for audio, right? Damned be anything else.
Sound
Here, Fiio make up for most of the X3‘s design gaffes. This sub-300$ player sounds damn good. It probably comes from Fiio’s long history of making headphone amplifiers and DACs. The parts they chose and the implementation of them into an audio circuit, are spot on.
Power: ohmage
Fiio’s tenure as an amp maker learned them a thing or two. Headphones run like a dream. No matter how many drivers your earphone packs, no matter how large their diaphragms, the X3 will run them with exquisite attention. Very few headphones will need more power than what is available through the X3 at high gain.
At full volume and high gain, the X3 kept clean signals at the following decibel values:
- Beyerdynamic DT800/600: 92-96dB with peaks up to 100dB
- Hifiman HE-500: 98dB with peaks up to 100dB
- Grado PS-500: 92-96dB with peaks up to 98dB
Only the Grado headphone commonly exhibited distortion at high volumes. In order to sustain clean signal, the X3‘s volume had to be backed off to about 93/100. All three headphones could sustain averaged 90dB signals with peaks of up to 98 decibels while exhibiting zero distortion. At the same volume levels, resolution levels remained nearly identical to unloaded signals.
In other words: if you don’t need hearing aids, the X3 doesn’t need an amp.
The Earsonics SM2 stressed the X3 only minimally. The combo was able to hit 100+dB without error, however compression of the dynamic range began after sustained 105-110dB loads. Of course, no one should listen to those levels, ever. That is, unless you’re Jonesing for a new Phonak hearing aid.
Balance: ohmage
The X3 is perfectly balanced. At first blush it might sound ‘dark’. It isn’t. It renders a flat, full-figured signal. Low/high balance at the frequency and stereo levels is exemplary. Ditto distortion.
This conclusion goes for both 16 and 24 bit files.
Regarding stereo crosstalk: The X3 outperforms most if not all players I’ve heard. By the book. But it may be too wide for headphone/earphone use. It can be overwhelming/disorienting. The X3 would benefit from a good crossfeed option in order to sound more natural.
Tracking: ohmage
The X3’s digital volume pot is perfectly accurate, left to right, at both low and high volume levels. This is great news for sensitive IEM users who will likely keep volumes low. Both max and default volume values can be set from the Player Settings page.
The X3 also allows you to dial in left/right tracking values. This is helpful if one ear is more sensitive than another, or if your headphones/earphones err to one.
Users of extremely sensitive IEMs may notice the X3’s background noise. It isn’t as bad as a Sony Walkman, and certainly not even close to an AMP3, but it outputs 2-3x the amount of noise as a current-gen iPod nano and more than that vs. an iPhone 5. At volume levels of 15 and higher, the X3’s background noise shouldn’t bother even sensitive IEM users. Less than 12, however, is a slightly different story.
NOTE: at Head-Fi I’ve earned the name ‘hiss king’. I am irked by hiss levels that others are not. Even well-respected reviewers. Those afflicted with the same ear are few, but vocal. The above paragraph is written for them.
Bass vs. Mids: ohmage
The X3 plays an even hand. Neither frequency gets more love than the other. Mids, of course, are far easier for the ear to interpret. Detail in both bands is very high and distortion is low. Moot to how the ear hears bass is its slightly lower dynamic range.
Bass enhancement is handled well but is genre-dependent. Fat, duffy bass has a high distortion threshold. Natural bass levels can be tuned quite far. Even setting the X3’s bass adjuster high renders clean lows that never foul up the mids.
Setting bass to a level of 8-10 can cause bass to ‘round off’. But bass will rarely, if ever, distort.
Bass vs. Highs: ohmage
Highs retain edge and force at every volume range. From about 2K, an unloaded X3 exhibits very little audible loss of stereo separation but enough to set it below the iBasso DX100. But only barely...
In general, balance between lows and highs is very good. No matter how big the bass, or how trilly the treble, lows and highs maintain great balance and detail at all safe listening levels.
Vs. Low impedance: ohmage
Very few if any earphones out there should stump the X3’s amp section. It is most comfortable with earphones that average >8Ω under load, but is more than capable even below that.
The X3 packs a lot of output power. If you are primarily an earphone user, using the max volume function is a good idea.
Vs. High impedance: ohmage
While it lacks a 6,3mm headphone jack, the X3 is more than capable of driving most voltage-hungry headphones out there. It won’t be able to hit sustained levels of 110dB with Grado headphones, or Audio Technica’s EARSUIT series, but sustaining those levels aren’t important anyway- again, unless you are on the Jones for hearing loss and its accompanying gear.
I am extremely impressed.
Playback porridge
I’m not a slummy. I don’t dish out dosh on things I don’t use for work, but when I do dish, I tend to stay away from fake Tupperware. I abhor compromise. I like copycats even less. But while Oster may have lost to Kitchen Aid at home, I would feel perfectly at home carrying the X3 around instead of a DX100. Sound quality, output power, balance: it has all the stuff an on-the-go audiophile of any pedigree would need. Where it irks: true gapless playback and 100% silent background, are moot to most people.
And that is why I let them pass.
This review was written about two months after first receiving the X3. I was supposed to take only a month. If you hear nothing more out of me, Oyaide have probably...
What bothered me early on was the control layout and its reliance on dual-function buttons. It still bothers me. An audiophile gets used to gapless issues and a bit of fuzz in the background. But consumers who tend to buy they best of what they can afford, tend to be used to good design. Today, the control layout that bothered me early on, bothers me still. What’s that? You couldn’t hear me? Let me just turn the volume dow... wait... wrong menu... sorry. Just give me a moment longer-
-there, I got it!
I was saying that I tend to invest in good, ergonomic design. The X3 offers everything else. Price notwithstanding, Fiio could have designed this player better. Where you put your money, and how that sits with you months down the line, is very personal. Design quirks aside, I believe that Fiio did a good job. But I’m less excited about good than I am about excellent.
If you want a second opinion, check out these fine reads:
Headfonia: First Impressions: Fiio X3 DAP
[Impression] Fiio X3 - High Fi - Low Price
ohmage: 9
porridge: 5
...
Anyway, the Meridian/Neil Young collaboration portable player should see light of day in 2014. If this Facebook posting is on track, it's time to lube up.
Hearing PONO for the first time is like that first blast of daylight when you leave a movie theater on a sun-filled day. It takes you a second to adjust. Then you enter a bright reality, of wonderfully rendered detail.
Either it is going to sound crap (and therefore will require you to adjust) or it will sound good (and you will be able to lay off the lube). Whichever it turns out to be, I think it is safe to say that portable audiophile is on the rise.
Earphone Geek is a pretty well-known audio blogger here in Japan. Rightly, he got a short but good ear on Sony's new earphones. Here are a few notes from his review.
XBA-H3 Highlights: ohmage
XBA-H3 Highlights: porridge
NOTE: MMCX connection
XBA-H2 Highlights: porridge
NOTE I: Sound that mimics the worst of the EX1000 and the worst of the previous XBA series.
NOTE II: Earphone geek notes NO good points.
XBA-H1 Highlights: ohmage
NOTE: Among the new, bass-blessed H series, this model has the best cost/performance ratio.
Again, Earphone Geek's review is here.
Fujiya-Avic released the details and pre-order info for three new large-driver hybrid earphones: XBA-H3/H2/H1 as well as the new PHA-2 portable headphone amp/DAC which will support 24/192 PCM and 2,8/5,6MHz DSD. Yes, DSD audio.
Sony EU have more details about the new XBA series.
Here is the PHA-2's page.
PHA-2 should retail for 55.000¥. Its predecessor, the PHA-1, bookmarked the entry of mainstream audio companies into a market that, largely, has been controlled by a number of feisty boutique manufacturers. I was ecstatic about the PHA-1. If Sony has addressed the so-so performance with low-Ω earphones, the PHA-2 should kill its target market.
PHA-2: 55.000¥
XBA-H3: 16mm dynamic driver + 2-way balanced armature unit
37.000¥
XBA-H2: 13,5mm dynamic driver + single balanced armature unit
26.000¥
XBA-H1: 9mm dynamic driver + single balanced armature unit
16.000¥
This new line of portable products will debut and be ready for purchase in time for Fujiya-Avic's 2013 Fall Headphone Festival.
Sony is back.
Big things come in bigger packages. (And big packages generally must be scooted down the hall in push-pull spouse trains.) ALO Audio's debut desktop amp is leviathan big. Still, I managed to plop it on top of my HiFi all by my lonesome. There, at the summit of my living room, it perches from a spiritual position I believe it truly earns: the top.
Spec:
Headphone impedance compatibility range:
8 Ohms to 600 Ohms
Maximum rated output power:
1,000 milliwatts into 8 to 32 Ohms
Amplifier input impedance:
95k-Ohms
Amplifier input Voltage for full-rated output voltage into various headphone impedances:
1.00V RMS input for 4.0V RMS output into 16 Ohms
1.30V RMS input for 5.7V RMS output into 32 Ohms
1.70V RMS input for 7.5V RMS output into 75 Ohms
1.85V RMS input for 8.3V RMS output into 150 Ohms
1.70V RMS input for 8.2V RMS output into 300 Ohms
1.65V RMS input for 8.1V RMS output into 600 Ohms
THD+N (1kHz input) at 1V RMS output into stated load impedances:
32 Ohms: 0.26%
150 Ohms: 0.12%
THD+N (1kHz input) at 250 milliwatts output into stated impedances:
32 Ohms: 1.0%
150 Ohms: 2.0%
Frequency Response -3dB (Referenced to 1kHz, 250 milliwatts output) into stated impedances:
32 Ohms: 6.0Hz to 39kHz
150 Ohms: 16.5Hz to 36kHz
Frequency Response -1dB at full-rated (2.83V RMS) 1,000 milliwatt output into 8 Ohms:
15Hz to 20kHz
S/N Ratio:
78dB (unweighted) below full 2.83V RMS output into 8 Ohms
ALO Audio Studio Six: ~4.900$ USD and up
ohmage: haptics
The Studio Six pushes a Sasquatch-sized footprint into your HiFi station, but its interface is as easy as falling off a log. The front panel is graced by two large rotating knobs. The one on the left clicks between three positions which correspond to inputs. The glorious one to its right is the volume pot, which is as smoothly damped as a Leica lens. The bastard child of Rockwell and Knobfeel would glory in its silky, one-fingerable operation.
The back panel arrays gold-plated RCA inputs directly behind the input selector knob. A mysterious port dubbed Accessory Power Connection sits below. Opposite it are the volume switch and accompanying ATX port.
The Studio Six is single-ended, in and out.
ohmage: kitsch
Here at KitschWatch, we approach things like glitter, buffed plastic, chromed polyurinethane, and so on, with thumbs turned way down. My nose says that ALO, too, are anti-kitsch. The Studio Six is laser etched, bolted, and bent to precision. Its knobs are precise and damped, and its inputs are so firm in the chassis they are practically part of it.
ALO make one thing very clear: that you know this amp was made by them. It was designed and built in the USA, and it is made to last.
ohmage: build quality and finish
Hinted at above is a build that amounts to nothing less than ponderous quality. It is a quality that, on the one hand, conjures up the lastingness of a WWII German tank, and on the other, the iterative polish of a Leica M. Every piece is solid, perfectly balanced, and just as impeccably as it is produced, it is branded with ALO's now famous marque.
The power indicator in its silver ballast warmly glows in orange, matching the Studio Six's glowing valves. The knobs reflect light in gentle waning crescents. Even the bolts that secure the headphone outputs and RCA inputs are secured at the same angle. In photographs, the Six intoxicates.
Its balance between simplicity and utility is almost poetically Leitz.
Unfortunately, the Studio Six sticks out so much because the importance of beautiful and precise manufacturing has been supplanted by expedience and outsourcing. The non-artisan's motto of "as long as it performs well..." resounds in clangy, ill-finished lumps of metal and plastic, as devoid of unity as they are of vision.
At least they perform well...
Since the very beginning, ALO Audio instilled into every product the goals of craftsmanship and precision. And most of their line performs as good or better than the competition.
The one improvement I can think of is adding corresponding ticks to the input selector knob.
Sound: ohmage
Typical ALO amps can be divided into two camps: the benchmarker and the powerhouse. The Rx series forged new benchmark ground at its launch its inception, toppling many a top performer along the way. More recently, The International, and it similarly housed brother, The Continental, have impressed with power and warmth.
The sound of the Studio Six is a marriage of the two. It has limitless power, but on the other end, it is nearly limitless in headphone driving performance.
Power
If ALO's main aim was bragging rights, they nailed it. Studio Six supplies limitless power to the widest variety of headphones I have observed in a single full-sized HiFi headphone amp. High-ohm HiFi favourites like the T1, HD800, DT880, and Maddog, run flawlessly from minimal casual listening volume levels to maximal in-the-next-room-and-still-loud volume levels. At no listening volume does any headphones crackle or sizzle.
I have not tried the K1000 with the Studio Six, but I suspect it may have found its first non-power amp match.
More impressive is the Studio Six's ability to drive current-hungry PS500, LCD-2/3, HE-500, and their like, at any volume, sane or insane, with the same purity of signal. The is no audible nor measurable drop in output performance with any modern or classic home headphone. This trend continues on down the line until, at last, you reach inner ear monitors and portable headphones, whose high-current requirements take their toll on an amp that primarily is designed for home headphones.
The effect is a slight loosening of the Studio Six's otherwise tight frequency response. Low ohm portable headphones gain a slight boost in the 100Hz range, and armature earphones throw the Six off at the crossover level to the maximum of about 2dB at maximum. Put into context, such artefacting is laughable. The Six is better able to drive low ohm earphones than ALO's own Continental series of portable headphone amplifiers is. Ditto a large number of dedicated earphone amplifiers out there.
I ran a torture test consisting of the following array: DT880, PS500, HE500, SM2 (yes, those amp-killing earphones) and noticed no untoward current or voltage drops. Of course, concurrent parallel playback of multiple headphones only makes sense when every model is the same. But the Six demonstrates that it an handle anything in any combination.
As for input power, you can basically hook up anything from an iPod to strong line-level mixing boards and should experience no input overload.
Balance
The Six spreads it power quite evenly. It has gentle low and high pass filters on either frequency extreme independent of loads. They measure at less than minus 2dB and start rolling off at 100Hz and 12kHz respectively. I don't think they could be considered audible without a rigorous (and placebo inducing) dose of measurebating.
Tracking
Personally, I find most impressive the Six's almost flawlessly ability to track between any headphone. Naturally, there is no detectable left/right difference for any typical HiFi headphone. Even sensitive IEMs track at usable levels. The volume pot, whose long gain throw allows fine left/right tuning is part of what makes this possible. The other part is the Six's overall modest gain that defers control and power to the volume pot.
Bass vs. Mids
Valve-based amplifiers tend to smooth out some details, preferring warmth and 'musicality' to minutia. The Six's clearest and most powerful frequency is its midrange where signal clarity and strength are best. Signal noise is very low for a valve amp. More impressive is the Six's ability to separate left from right with keen precision. Stages are vast, but not cutting.
Small details are clear but don't draw untoward attention. I found the Six loves live. Neil Young is probably one of its favourite artists. But the Six is no slouch when it comes to modern electronic music, either. Decent rise time puts it in good standing for trance, IDM, and double-speed John Denver discs.
Of prime beauty are chimes, high strings, cymbals, and the brassy, shimmering, strumming like. Bass is slightly less clear, bit its performance follows the same general principles. It is wide, fast, and able to resolve the important details. But by a hair, mids are king, and they are absolutely stunning.
Bass vs. Highs
These frequencies really are equal. Both contain a little more of that special dose of musicality that the mundane reviewer would read as valve distortion. There is no way around it: valves output more THD per volt than their solid state brethren. Those who like that distortion, like it a lot.
I have begun to prefer valves for live performances, and, more recently, for violin concertos and IMD Forum purchases. Why? Reality. Headphones tend to dissect things too much, unnaturally hiding left/right information, especially in complicated recordings. The Six doesn't cross feed channels, but the warmth from its valves smartens up otherwise too-headphoney of signals.
Vs. Low impedance
As mentioned above, Six is absolutely rock solid. Only very low ohm earphones can trip it up, and only just. Most valve amps throw good voltage swings but don't hold up quite so well when driving variable loads.
Vs. High impedance
Again, no problems here. The Six is more than able to toss around your least sensitive, voltage-hungry cans. I've encountered no headphone (or combination of headphones) that even remotely trips this amp up. It is more than capable of turning any headphone into desktop speakers. In fact, I am confident that the Six could run sensitive speakers with little problem.
Personal favourites are the Grado PS500, the T1, and the LCD-2, each of which sing so wonderfully through the Studio Six.
The Studio Six isn't just an amp. It is a statement, that punctuated by precise engineering, utilitarian design, and excellent performance, has other amps blubbering. No, it isn't a balanced amplifier. It is The single-ended amp, tweaked and perfected. ALO proved yet again that they are not merely product designers. They are tinkers. They are engineers. They are artisans. And crowning their panoply of amps, cables, and more, is the Studio Six, an exact, performance-oriented amp which proves that ALO are in it for nothing less than to change the industry.
ohmage: 4
porridge: 1
Tsukuba, Japan
